Видео

love it!

The little test print turned out perfectly on my FF CreatorPro 2. So it will help greatly as the bed size is small. Now, to make it print each layer with alternating extruders! Could be fun.

- What I learned about Blender and SVG: Blender is not a vector app! :D - But some vector things are possible - so, thanks for sharing the details.

Drink every time he says multiboard. 🍺

Gratuit mais payant pour télécharger !

one thing i'd like to see is different shapes for the back board that can still interlock with each other and the stand shapes so you can get some designs going on like a multiboard wall in the shape of an Octogon and what not.

How are you doing straight sigle line please ahah ?? Can't understand how you align straith the thing

How do I get the started pack to print on a ender 3 v3 ke it does not fit on the print bed ?

Gridfinity pushed me over the line to get a 3d printer last week. I'm super exited to get started with this as well.

Watched the first 7 seconds... complicated describes this whole thing so far. So confused as to where to start with all the different iterations and significant version changes that have made everything before the changes... obsolete? I don't even know the current state of things and how many generations are now outdated. Wish there was a video explaining the timeline, changes, what is outdated, and where things are now. Have paid a subscription for Monthhhhhsssss, wanting to print the organization tools I'm paying for... but have been so overwhelmed that I haven't even printed a single piece.

“I bought the plate, I’m gonna use the whole damn plate”

Nice video. I started experimenting with extrude manifold and did not know you could not extrude past an edge. As per fixing up geometry to make it quads, I use the knife tool with "cut through" on (hit C after K). It usually works quite nicely, and then you can do loop cuts again. Also I agree 100% that everything should be quads during block out - ideally throughout the whole process, but that's not always possible.

does an open garage with an additional open door to a back yard for air cross flow count as a well ventilated area for the purpose of printing?

Saw the $8 minimum, said naw, saw the suggested $15 monimum, said naw. So I upped it to $25 USD and said, "Oh heck ya" Huge thanks for making this! I could have spent hundreds on other software systems to have similar or worse ease of use for developing gears, but you sir are a champ. I spent less and get access to parametric gears for way less hassle.

Is there any alternative non toxic resin?

Hi !! Great work, I´m looking to start with multiboard at home. I want to print my tiles with a 0.8 nozzle but ... 0.2 layer, and the details needed, is this impossible? Thanks!

Hey there, i wanted to ask about some more details about the mask you wear. I am getting into resin printing myself and finally settled on a location. But untill i can get an actual vent fan installed in the ceiling of the room, all i really have is windows and a ceiling fan. I’d like to know what specific mask and/or filters i need to best protect myself from the resin, seeing as you stated this was something you’ve had a career in experience with volatile organics PPE, i want to make sure im selecting the correct filter ratings. Id like to steer clear of getting amazon specials too, looking to get atleast 3M brand or better. Thank you for any info you can share.

This literally doesn't show how to stack them...

when is the atach a bin to a board going to come out? Im trying to figure out how to attache my different bins to my wall multiboard. help please !

This isn't productive at all, it's almost like making a rocket to make a precision hole, this video is 4 years old, is there a faster way to do this, I'm still struggling a lot with Blender to do things with precision. I'm a beginner in blender, I try to do everything in 2D, export with DXF and start from 2D to create 3D, I do 2D very quickly with Corel... I would have a way thinking in the way I mentioned 2D (dxf) to 3D blender with precision. I'm making a piece that mixes precision with semi-organic design

asked in discord...got no help. In 4.1 this does not work or i do something very wrong. I want to create several workspaces and when the are done i wanna add them like a combined version => like general setup => has several unique workspaces If i do this and save my prefs for the actual workspace i work on it gets overwritten for all the others no matter if i put it in config or in scripts or in both. Please do another tutorial for this with a setup with several workspaces tabs in on setup that all have their own config

what filament I use to print it? can i do it with petg?

Bad contiguous edge fixed thank you.

Hi, i need help to install CAD sketcher add-on. Please can you help me 🙏🏻

I have no idea why the like ratio to view ratio is so low, this video was incredibly helpful and informative. Thanks for the heads up, this video definitely earned a subscribe.

This is so stinking cool. I don't have a 3d printer but I want to get one just to print this

Umm, what? I'll look for the iorn feature, but really, I've wasted half a kilo and can not get this apart without breaking 😢 I will try something smaller

Your design skills are amazing

Your accessories are awesome. And that's why pegboard/slatwall remains king, the amount and variety of mass market accessories made for the system.

K I’m gonna try again

Do I need to print the 4x stacks with supports enabled?

Damn, bought a resin printer two days ago and even though I have gloves etc I have this shit everywhere.

Great job :D Just bought it on the blendermarket and it´s super helpful. I have a question, is it possible to parent other objects to the instanced gears etc. without boolean it to the original gear?

Makes me happy my dad has his printer in his open air garage and that he can just send it's commands for printing remotely from his studio at the other side of his house.

I love the idea, but I'm confused why you would want the bins to be sideways...

Oh great! Let's combine two fantastic open source ideas together and sell them with yet another subscription plan. Eat sand dude

Mounting was hard for me because of too many screws. If I did this again, I would just assemble the whole thing then put a left top mount, but not screw whole the way to keep it rotatable, then level the panel and mark the other holes and then drill the holes. After that I would put just few screws at the bottom to keep it aligned to surface. Note to the creator: Make sets, like 4x3, 3x3, 6x8 whatever, so people will not get lost while trying to figure out if corner, side or core tiles are needed. Also mounting sets for each one is required.

I don't understand how to hang the trays or buckets on the panel. I can't find the hanging tool. I don't know how you do it.

Have you seen Onsel, the new front-end for FreeCAD? I would be interested in your take on it.

So If I live in a warm and ventilated place I should be fine? Like its usually 32+ degrees here about 80% of the year. Or did I missed something?

"It is not a good practice to have such a large pop-up window, especially when it concerns subscription cancellations. I have already pressed the unsubscribe button sometime in May 2024, but I wasn't paying close attention to the pop-up's corner. The unsubscribe button is hidden among several other marked buttons, making it difficult to notice. Please review your interface design."

Hello I love your product and I want to print some Multiboard. But my problem is that I am new to 3-D printing and I just got my Bambu lab X1C 4 days ago and still trying to figure out all the settings in the slicer, which is very overwhelming for me since I have zero past experience in the field. So I was wondering if you could make a video on the settings do use and modify in bambu lab to print Multiboard as fast as possible, without damaging the quality like what is the best settings to use Ludacris mode 🙏

Also, I think its time to revisit FreeCAD. The topographical naming error has been addressed. Also quite a few sketching additions. Keep up your great work !!

Thanks mom, I'll go back to breathing fdm fumes the way nature intended

this is awesome, I want to make my own prizes for a series of events I run, this is perfect for that personal touch!

i'm building a resin 3d printing area for the van i live in. ✌🏼

"Ronko Garden Weasel" ! lol (I want one)... ...or the slap chop, or the shake weight ! Thanks, some great engineering there.